Size Guide


Size Guide and Fitting

The first step when looking to buy a new or replacement lamp shade is… what size?  We get asked a lot so put together a useful guide with some simple rules to point you in the right direction.

Which size should I choose?

Measure the current lampshade:

If you currently have a shade on your lamp, measure its:
- Height
- Top and bottom diameters

You should also measure the total height of the lamp base including the lamp shade. It’s handy to draw a quick sketch of your lamp with all the measurements shown so you can visualise it.

Design Rules:

Now are some basic design rules to follow so the proportions of your lamp shade fits the base, and the space you are displaying it – e.g. bedside, hall/entry table, floor, or hanging from the ceiling (pendant style lamp shade).

 

Rule 1.

The height of the lamp shade should be approximately one-third the height of the lamp, try to get as close as you can to these proportions but a few centimeters difference won’t matter much.

Rule 2.

The diameter of the lamp shade should always be greater than the width of the widest part of the lamp base. Ideally, the lamp shade diameter should be be two times the diameter of the lamp base.

Rule 3.

If the lamp shade is for a table lamp, measure the table where the lamp will be, ideally the lampshade shouldn’t be over hanging out of the table area.  This is important especially for bedside table lamps, where size can be limited.

Rule 4.

Every rule has exceptions!  Don’t be afraid to get creative and put together a whacky combo that is unique to your style and space!

Pick the best fit:

All CASA LUSH lampshades come in a range of sizes so you can order the size that best fits your needs. Our standard sizes are:

- 20cm width x 21cm height

- 25cm width x 21cm height

- 30cm width x 21cm height

- 35cm width x 25cm height

- 40cm width x 25cm height

- 40cm width x 30cm height

- 45cm width x 30cm height

Below are some ideas for where each size would best suit in terms of type of lamp base and the room or space it is located.

 

20cm width x 21cm height

Small lampshade, great for very small bedside lamps; pendant lights in hallways and very small table areas in other rooms. The base should be between 18cm to 20cm height.

 

25cm width x 21cm height

Medium size lampshade, a very good size for bedside lamps, side tables and small buffet cabinets, The base should be between 20cm to 25cm height.

 

30cm width x 21cm height

Perfect for living room table lamps; buffet table lamps, and for big bedrooms especially with bedheads. The base should be between 25cm to 32cm height.

 

35cm width x 25cm height

Table lamp for big spaces, large side tables, large buffet cabinets. The base should be between 32cm to 50cm height.

 

40cm width x 25cm height

This size is ideal for very large table lamps and short floor lamps. Also great size for ceiling/hanging lamps.

 

40cm width x 30cm height

This is the most common size for floor lamps and fits most of the standard floor lamps, including tripods and “stick” style lamp bases.

 

45cm width x 30cm height

Ideal for extra large floor lamps and large areas.


Fitting: 

This is the part of your lamp where the light bulb screws in. Our lampshades are compatible with two sizes:

  • The 42mm Euro Light Bulb Holder, which uses an E27 light bulb.

  • The 29mm Australian Light Bulb Holder, which takes a B22 or E14 light bulb.

All of our lampshades have a 35mmfitting ring recess, which is the standard size for most table and floor lamps.

 

Where is the fitting located?

The lampshade fitting is located at the bottom of the shade. It's designed to sit directly on the light bulb holder, which is the most common style of lamp base in Australia.

 

Need a custom fitting for the lampshade?

Our lampshades are currently made for table and floor lamp bases. If you need a lampshade for a ceiling pendant or a lamp with a harp fitting, please send us an email.